Cabinet·CNC
Cabinet·CNC is free cabinet design software that turns dimensions into a cut list, a nested sheet layout, DXF and G-code ready for a 3-axis CNC. It runs entirely in your browser, with no account and nothing to install.
Free · no account · nothing is sent to a server
Seven cabinets were built, flattened and nested to publish this page. This is the fullest sheet of the batch, with its part marks, dados and holes. The drawing comes from the same code as the machine file, so it cannot drift from it.
Base cabinet, wall cabinet, oven column, sink base, wardrobe, bookcase, TV unit, vanity, workshop tool chest. These are not twelve programs but twelve sets of dimensions through the same generator, which is why any template can be pushed well outside its original size and still resolve.
Blum, Hettich, Salice and Accuride hinges and slides, plus trade-counter references. Each carries its real mounting geometry — K distance, screw centres, side clearance — so changing slide resizes every drawer box and moves the holes in the machine file. You can also enter your own supplier prices, which drive the quote.
A kitchen is designed cabinet by cabinet but cut all at once: one carcass's offcuts take the small parts of the others. The app costs the difference between the two methods, to the sheet and to the euro.
Runs chain wall after wall: an L- or U-shaped kitchen is drawn the way it is fitted, turning at the corner. The worktop lays over the top, bridges the dishwasher, stops at the wall, and comes out in linear metres on the quote — it is bought by the length, not by the sheet, so it never enters the nesting.
A shaker front and its hinge cups are machined on both faces. Programs are split per face, face B is mirrored about the sheet width, and a header announces the flip.
left
Dados and rabbets, Ø5 system holes at 32 mm pitch, confirmat screws, cam locks or dowels.
Read the page →centre
Through-fingered carcass corners, with the dogbone reliefs without which a round cutter cannot make a sharp internal corner.
Read the page →right
A sheet-goods carcass with a solid frame applied to the front, stiles and rails, pocket holes. The North American method.
Read the page →Three ways to hold a carcass together. It is a setting, not a different project.
Everything comes from the same model, so everything agrees. There is no re-keying between the drawing and the machine.
The studio publishes a QR code. Scanning it shows the cabinet at real scale in the room. The model is rebuilt on the phone by the same generator as the studio: what you see against the wall is what gets cut.
The cabinet at real scale, before the first cut.
Better to know before you try than after. These limits are deliberate, not accidental gaps.
Yes. The studio is free, with no account and no usage limit. There is no paid tier today.
No. It all runs in the browser. The computation happens on your machine: no drawing is sent to a server, and the app works offline once the page has loaded.
GRBL- and Mach3-compatible G-code, one file per tool and per sheet, plus DXF R12 whose layer names carry the cut depth. Common CAM packages such as VCarve and Aspire read that layer convention.
Yes. Dimensions display as fractions — 23 5/8 — and can be typed either that way or as decimals. The model stays in millimetres, so no rounding accumulates.
A test suite replays every program produced and checks that no rapid move enters the material, that no point is cut deeper than one pass at a time, and that the spindle starts before the first move. That is not the same as validation on your machine: air-cut or simulate every program before you cut.
Cabinet·CNC lets you choose the hardware brand and enter your own prices, offers three interchangeable construction systems, nests the whole job in one go, and also produces a table-saw cut sequence. It also fits the worktop and costs its linear metres. It does not do corner cabinets.
Yes. The studio publishes a QR code; scanning it shows the cabinet at real scale in your room in augmented reality. The model is rebuilt on the phone from the same generator as the studio.
Take a size you have built before, export the cut list and compare it with yours. That is the check that decides, and it takes five minutes.
Free · no account · nothing is sent to a server